Kieu-Trang Pham

1School of Architecture and Building Science, Chung-Ang University, Seoul 06974, Korea; moc.liamg

Duc-Nghia Vu

2School of Computer Science & Engineering, Chung-Ang University, Seoul 06974, Korea; rk.er.balcu

Chansik Park

1School of Architecture và Building Science, Chung-Ang University, Seoul 06974, Korea; moc.liamg
Licensee MDPI, Basel, Switzerland. This article is an xuất hiện access article distributed under the terms & conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).

Bạn đang xem: 4d


Temporary safety facilities (TSFs) are an essential support system providing necessary protection khổng lồ workers during construction activities, which are targeted towards preventing the occurrence of incidents & accidents at the construction site; however, the schedule và location of installation and demolition of TSFs continue to rely on labor experience, và are often omitted from formal drawings or documents. This results in thousands of accidents in the construction industry, especially in construction small và medium-sized enterprises (SMEs) because of their several limiting factors; therefore, this study proposes automatic workspace planning for TSFs based on construction activities, which is a systematized approach for construction SMEs khổng lồ practice occupational health and safety (OHS). By using building information modeling (BIM) & add-in algorithm, safety facilities can be simulated & visualized lớn integrate into the designated workspace. The developed system was implemented utilizing 4D-BIM for TSFs installation & validated with a case study on a residential building project. The result revealed that the visualized TSF produces a better understanding of safety measures with regard khổng lồ project schedule. Additionally, TSFs workspace planning provides an affordable approach that motivates safety practices among the SMEs; consequently, the effectiveness of construction safety measures & their management is enhanced appreciably.


Keywords: temporary safety facilities (TSFs), safety planning, workspace planning, safety management, 4D-BIM

1. Introduction

The integration of innovative technologies in the field of information & communication technology (ICT) is rapidly transforming conventional construction into smart construction. Nonetheless, the nature of the construction process makes it prone to risks và accidents; moreover, innovations in the construction sector have given rise khổng lồ new safety issues. According khổng lồ recent public reports, construction is one of the most hazardous occupations with considerably higher number of work-related injuries and fatal accidents than other industries <1,2,3>. The Occupational Safety and Health Administration (OSHA) reports show that worker fatalities in the construction industry in 2017 accounted for 20.7% with 971 cases. Indeed, among the hazards that tài khoản for injury và death, OSHA has labeled “Fatal Four” as the leading causes of workplace deaths, which are responsible for more than 60% among the construction worker deaths, by the US Bureau of Labor Statistics (BLS) reports. These four main hazards consist of falls, struck-by-object, electrocutions, & caught-in-between <4>. Figure 1 shows the proportion of accidents attributed lớn each category in the Fatal Four.


*

Proportion of accidents attributed khổng lồ Fatal Four in construction, as reported by the Occupational Safety và Health Administration (OSHA) 2018.


On the other hand, the planning of occupational safety is determined by the form size of the construction site, system of work, & project delivery methods. A comparison among firms of various sizes shows that a high proportion of accidents in terms of number or severity occurred in small firms <5>. The literature nhận xét revealed that there is no standard definition for determining a construction small and medium-sized enterprises (SMEs), there are differences among countries và industries <6>; however, SMEs can be defined by some common criteria that comprise the number of full-time employees & annual sales are below a certain level. For example, in the European Union (EU) a company with fewer than 250 employees is considered an SME, while in the United States (USA) an SME has fewer than 500 employees. According to lớn the Annual Report on European SME in 2016 and the USA Small Business Administration Statistic in 2015, the proportion of employment in construction SMEs made up for 87.6% and 82.7% respectively <7,8>. It means that the improvement of safety management in construction, SMEs play a critical role khổng lồ safeguard more than 80 percent of workers in the construction industry. There are various factors influence the safety performance in construction SMEs, including the number of laborers, limited availability of skilled labor, less years of experience, resource availability, poor safety attitudes, form size of the project, contract value, và time & budget for construction <9,10>. Accordingly, this imposes several constraints that lower the commitment of SMEs khổng lồ implement safety programs. Thus, the actual health và safety practices in the construction sector need lớn be investigated from many aspects <11>. Normally, SMEs are involved in all sequences of the construction process. The shortage of technically skilled và experienced laborers makes the SMEs more prone khổng lồ adopt adverse safety practices <9>. Regardless of the many guidelines provided by OSHA và resources available for improving safety management, the compliance of these safety regulations in practice remains reactive rather than proactive. Owing khổng lồ the overwhelming number of safety rules, identifying the appropriate safety guideline and delivering them to the right personnel or right working place becomes a challenge. Considering the abundance of safety guidelines in construction, workers or even inexperienced managers may be unaware of or ignore some safety requirements during construction operation <12>. Furthermore, it is undeniable that safety awareness is not sufficiently high in construction SMEs. Consequently, issues such as forgetting lớn adhere khổng lồ safety guidelines & misunderstanding the guidelines are common, resulting in accidents. Besides, designing safety planning requires the involvement of safety professionals; however, SMEs claim that they bởi vì not have the necessary funds to engage specialist human resources. Khổng lồ overcome this, SMEs need to follow a strategic method khổng lồ drive the adoption of new technologies và building information modeling (BIM) processes.

On the other hand, these traits are not all negative, they also have positive points. SMEs could have more potential than larger companies in simplifying the incorporation of BIM by converting their drawbacks into opportunities <13>. Although SMEs have limited human resources, they attract new và young workers into the sector, who are interested in novel technologies và innovative ways of working. With small to medium amounts of construction information, SMEs can be more agile & simple than larger firms in implementing, syncing, & integrating digital information. Additionally, decisions are generally made more quickly and more manageable in small-scale organization rather than an extensive implementation with numerous reviewed time and disruption. In fact that a lot of construction SMEs, especially start-up firms have been proactive catch up with BIM technology and new tendencies, enhancing their competitive ability and narrowing the gaps with larger firms. As a result, the application of BIM in SMEs is an inevitable trend for the future construction industry.

This paper proposes a 4D-BIM-based automatic workspace planning which allocates temporary safety facilities (TSFs) for designated model objects/conditions integrating activity-based hazard evaluation & its corresponding prevention. The assessment data were arranged specifically by the severity rate of accidents related to lớn individual activities và then the correlated protection was calculated. The proposed approach was applied khổng lồ a residential building project. It was found that 4D-BIM software platforms could automatically place the TSFs at the right time và right place. It is expected that the system can provide general safety planning without the participation of safety experts. Consequently, it decreases the manager workload, improves safety management, saves SME resources, and helps construction SMEs khổng lồ adopt a closer approach khổng lồ a smart & safe working environment.

The remaining paper is structured as follows: Section 2 poses the state-of-the-art studies performed in this research domain. The section discusses the importance of construction fatality data analysis for safety planning, application of TSF in construction SMEs, BIM-based safety planning, and need for an effective approach for safety planning in construction SMEs. Next, the proposed framework is presented in Section 3. Section 4 discusses the data assessment process. Then, Section 5 gives the research design for the proposed system. After that, a case study of a residential building project is presented in Section 6. Section 7 discusses the proposed system evaluation results. Finally, the limitations of this study along with the conclusions and direction of future research are presented in Section 8 and Section 9 respectively.

Trẻ dậy thì, giai đoạn cơ thể không chỉ chuyển đổi về thể hóa học mà còn đổi khác cả tâm lý để trẻ hoàn toàn có thể chuyển sang tiến trình mới - quy trình người trưởng thành. Quá trình này thường bước đầu ở lứa tuổi khoảng từ 8 đến 13 tuổi so với trẻ gái với 9 - 14 tuổi so với trẻ trai. Thuộc với quá trình dậy thì thì trẻ bước đầu có xu thế mọc lông bên trên cơ thể. Nội dung bài viết này sẽ cung cấp thông tin chi tiết hơn về thời kỳ này của trẻ.


Thời kỳ dậy thì làm việc trẻ rất có thể coi như xuất hiện thêm sớm lúc trẻ ở tuổi 8 tuổi (trẻ gái), 9 tuổi (trẻ trai). Quy trình này cũng hoàn toàn có thể được coi như muộn trường hợp chưa ban đầu ở tuổi 13 (trẻ gái) và tuổi 14 (trẻ trai). Quy trình dậy thì ở nhì giới nam giới và nàng thường khác nhau.

Những biểu thị dậy thì đối với nhỏ xíu gái

Thời kỳ dậy thì thường bắt đầu khi bé xíu gái được 10.5 tuổi. Dấu hiệu trước tiên nhận thấy ở thời kỳ này với sự trở nên tân tiến của ngực. Ngực nhú lên thành phần nhiều cục nhỏ tuổi dưới thế vú của trẻ ngơi nghỉ cả 2 bên hoặc một bên. Thời kỳ này trẻ bước đầu phát triển chiều cao nhanh. Sau khoảng tầm 6 tháng khi bắt đầu thời kỳ dậy thì, lông mu bước đầu xuất hiện, tuy vậy ở một vài trẻ đặc thù thì quy trình mọc lông mu ban đầu dấu hiệu mới lớn của trẻ.

Trong vài năm tiếp theo đó, ngực của trẻ liên tiếp phát triển, phệ lên dần dần dần, lông mu và các cơ quan không giống phát triển. Với trẻ gái bắt đầu bước vào thời kỳ khiếp nguyệt. Biến hóa này sống trẻ thường xảy ra khi trẻ em 12.5 - 13 tuổi.

Xem thêm:

Quá trình dậy thì của con trẻ gái diễn ra trong khoảng thời hạn từ 3 mang đến 4 năm. Ở tiến trình này nhỏ bé gái có thể cao vừa đủ 7-8 cm/năm.

Những biểu thị dậy thì đối với nhỏ nhắn trai

Thời kỳ dậy thì ở bé trai bao gồm thể bắt đầu muộn hơn bé xíu gái , thường ở độ tuổi trung bình từ 11.5 cho 12 tuổi. Dấu hiệu dậy thì trước tiên ở trẻ trai tăng kích thước tinh hoàn. Kế tiếp vài tháng, lông mu bước đầu mọc. Lông mu, lông nách, tinh hoàn với dương vật trở nên tân tiến nhanh trong thời kỳ này. Mặc dù nhiên, sinh sống trẻ trai vận tốc tăng chiều cao tối đa lờ đờ hơn trẻ con gái tự 2-3 năm.

Thời kỳ mới lớn ở con trẻ trai chấm dứt sau khoảng thời hạn từ 3 đến 4 năm với lông mu, tinh hoàn và cậu nhỏ đạt form size như bạn trưởng thành. Tiếp vượt trình phát triển ngực với râu.


bé trai dậy thì
Thường ở lứa tuổi trung bình tự 11.5 đến 12 tuổi các nhỏ bé trai bước đầu dậy thì và mọc lông mu

2. Quy trình mọc lông nách với lông mu


Lông mu và lông dưới cánh tay / nách (y học gọi: Lông nách) mở ra khi tuyến đường thượng thận tăng cấp dưỡng một các loại hormone DHEA. Hormone này cũng gây nên mùi cơ thể và đôi khi cũng thuộc lý do gây ra mụn trứng cá vơi ở trẻ trong quá trình dậy thì.

Trẻ mấy tuổi mọc lông mu? tiến trình này biểu hiện sự bước đầu tăng năng con đường thượng thận. Sự tăng năng tuyến thượng thận thường bình thường ở các nhỏ bé gái từ bỏ 8 tuổi trở lên cùng các bé trai tự 9 tuổi trở lên. Trong cả khi lông mu cùng lông dưới cánh tay xuất hiện ở hầu như trẻ bé dại hơn tuổi này, điều đó thường không tồn tại gì xứng đáng lo ngại, tuy vậy trẻ bắt buộc đến chạm mặt bác sĩ nhi khoa để kiểm tra. Bác sĩ vẫn vẽ biểu vật dụng tốc độ trở nên tân tiến của đứa bạn trên con đường cong tăng trưởng và khám phần tử sinh dục.

Trẻ ở lứa tuổi mọc lông mu nào thì an toàn? Lông mu cùng lông nách sớm được coi thông thường nếu một đứa trẻ phạt triển bình thường và theo dõi và một phân vị trên tuyến đường cong lớn lên của bác bỏ sĩ và không có sự to lên đáng kể của âm vật ở phái nữ hoặc sự trở nên tân tiến dương trang bị hoặc tinh trả ở các bé nhỏ trai.


3. Quá trình cải tiến và phát triển ngực của con trẻ gái


Hầu hết các bé bỏng gái bước đầu phát triển ngực vào khoảng 11 tuổi, nhưng khoảng tầm 15% nhỏ nhắn gái fan Mỹ gốc Phi và 5% nhỏ bé gái da trắng sẽ ban đầu phát triển ngực trước 8 tuổi. Những bé bỏng gái bước đầu phát triển ngực trước 8 tuổi đề nghị được bác bỏ sĩ nhi khoa khám nhằm biết chắn chắn những dấu hiệu đang cải tiến và phát triển không yêu cầu một rối loạn nội tiết cực kỳ nghiêm trọng gây mới lớn sớm, nhưng số đông các trường hợp hầu hết bình thường. Trẻ nhỏ gái 14 tuổi và ngực không trở nên tân tiến nên được đánh giá về mới lớn muộn. Sự cách tân và phát triển của vú bắt đầu từ những chồi vú, hầu hết vùng tế bào tròn cứng dưới thế vú. Thuật ngữ y học cho sự bắt đầu phát triển của vú: Thelarche. Câu hỏi các nhỏ xíu gái phát triển ngực ko đều bình thường và phổ biến, một bên ngực trở nên tân tiến nhanh hơn bên kia. Một số cô bé sẽ trở nên tân tiến sự xuất hiện của mô vú, cơ mà không có ngẫu nhiên nụ vú săn cứng cáp nào - lipomastia, và nó thực sự chỉ là 1 trong những tập phù hợp chất lớn ở vùng vú. Lipomastia không thay mặt đại diện cho tuổi dậy thì.

Hình thức phổ cập nhất của sự trở nên tân tiến sớm của vú thực sự xảy ra ở những bé xíu gái bắt đầu biết đi bên dưới 2 tuổi. Những cô gái trẻ này rất có thể phát triển những chồi vú bao gồm thể biến đổi kích thước cùng thậm chí biến mất hoàn toàn. Phần đông thời gian, sự phát triển rất sớm của vú sống các bé nhỏ gái bắt đầu biết đi ko nghiêm trọng. Vẫn không rõ nguyên nhân gây ra bệnh khô vú sớm, tuy nhiên một mang thuyết cho rằng u nang buồng trứng rất có thể đang giải phóng những hormone kích say mê sự phát triển của chồi vú.


quá trình trở nên tân tiến ngực của bé bỏng gái
Hầu không còn ngực của các nhỏ nhắn gái sẽ ban đầu phát triển vào mức 11 tuổi

4. Thời điểm trẻ gái bước đầu xuất hiện tởm nguyệt


Các bé gái thường bắt đầu có kinh khoảng 2 năm sau khi chồi vú xuất hiện. Tuổi mức độ vừa phải của chu kỳ luân hồi kinh nguyệt đầu tiên, hay còn được gọi là kinh nguyệt, là khoảng chừng 12,5 tuổi làm việc Hoa Kỳ. Tất cả sự khác biệt đáng nói về chủng tộc về độ tuổi bao gồm kinh nguyệt đầu tiên, cùng với những cô nàng người Mỹ gốc Phi ko lai Tây bước đầu sớm rộng những cô bé gốc da trắng cùng Mexico.

Khi nào nên phát triển dương vật và tinh hoàn của nam nhi trong tuổi dậy thì?

Sự trở nên tân tiến của tinh trả và dương vật thường là tín hiệu dậy thì đầu tiên ở phái mạnh giới, mang dù đôi khi lông mu với lông bên dưới cánh tay hoàn toàn có thể xuất hiện đầu tiên. Phần lớn các bé nhỏ trai bước đầu dậy thì tự 12-16 tuổi, tuy nhiên dậy thì không được xem là sớm ở bé bỏng trai trừ khi dưới 9 tuổi.


5. Tại sao gây mới lớn sớm


Dậy thì sớm thường bình thường, nhưng lại cũng hoàn toàn có thể do xúc tiếp với thuốc với hóa chất, bao gồm các một số loại kem với gel chứa estrogentestosterone, các loại tinh chất dầu như dầu cây trà với dầu hoa oải hương thơm và hoàn toàn có thể là một nhóm chất độc được tìm kiếm thấy trong một vài sản phẩm vật liệu nhựa phthalates. Nếu cha mẹ hoặc thành viên không giống trong mái ấm gia đình đang thực hiện kem hoặc gel kích yêu thích tố, hãy rất là thận trọng về vấn đề rửa tay sau khi sử dụng và trước lúc chạm vào các mặt phẳng gia dụng.


Để để lịch thăm khám tại viện, người tiêu dùng vui lòng bấm số HOTLINE hoặc để lịch thẳng TẠI ĐÂY. Sở hữu và để lịch khám tự động hóa trên vận dụng My
uia.edu.vn nhằm quản lý, theo dõi và quan sát lịch với đặt hẹn rất nhiều lúc số đông nơi tức thì trên ứng dụng.